Newell 2000

Roller to Roller Chain Driven Live Roller Conveyor

• Close roller centers for handling products prone to shifting during transport.
• Designed for plastic pallets, but also ideal for loads discharging from a palletizer, leading up to a strapping or stretch wrapping station.
• Special roller to roller design is quiet, smooth running, better than single strand conveyors, and more positive than conveyors with every other roller driven.
• Can be used when transporting wooden pallets the ‘wrong way’ with bottom boards parallel to the rollers.
• Capable of individual loads up to 4,500lbs.

Rollers:

2-1/2″ diameter x 11 gauge galvanized steel rollers with two grease packed precision bearings, 7/8″ diameter shaft, drilled and tapped each end for 1/2″-13 bolts, two #40A17 sprockets

Roller Spacing:

3-1/4″ roller centers, for 3″ centers see Newell 2005 Series

Conveyor Width:

18″ through 75″ between frames, 1″ increments, effective conveying width = BF – 3″

Frame:

Structural steel weldment, C5@6.7 drive side, 3-1/2″ 3″ x 1/4″ angle on idler side, roller set 1/4″ high on idler side. 3″ x 3″ x 1/4″ structural steel angle legs welded to frame.

Chain:

#40 roller chain

Lengths:

From 3’10” to 10’4″ in 3-1/4″ increments, other lengths upon request

Chain Cover:

Two piece fully enclosed scalloped guard, 11 gauge

Drive:

Nord gearmotor, 1/2HP standard, speeds 30-90FPM